Chap. 3. Safety Instructions - Fama TS 12 Manuel D'utilisation

16. It is forbidden to slacken the mouth block knob or the blockage wheel both during the working and
however before of 5 sec from the machine stop control,
17. It is forbidden the functioning with the protection shelters and fixes not blocked correctly or removed;
18. It is forbidden the partial removal of the protections and of the danger signals.
19. It is forbidden the functioning without that all the precautions about the residual risks elimination have
been adopted on behalf of the user,
20. It is forbidden to smoke or use free flame devices and manipulate incandescent materials, unless some
suitable safety measures aren't adopted,
21. It is forbidden to work or regulate the control and blockage devices as knobs or similar both during the
machine functioning, both if you aren't authorized
22. the use of plates with holes diameter bigger than 8mm is forbidden.
The user is however responsible of the damages resulting from the lacked observance of the specified normal use
conditions. For possible doubts you can enquire at the Authorized Assistance Center.

CHAP. 3. SAFETY INSTRUCTIONS

INTRODUCTION
The lacked standards and safety procedures applications can be danger and damage sources.
The machine means bound in the use for the respect, on behalf of the final user, of:
1. all rules, of insertion in the environment and of people behavior, fixed from the laws and/or applicable
standards; with particular reference to the fixed plant upstream of the supplied machine and for its
connection / functioning;
2. All further instructions and use warnings making part of the technical / graphic documentation annexed to
the same machine.
Except where differently specified, the personnel which performs the installation interventions, connection,
maintenance, reassembly, and reuse, damages or breakdowns, demolition and dismantling must be a
skilled personnel qualified in safety matter and educated on the residual risks, with the competencies, in safety
matter, of the maintenance employees.
ENVIRONMENTS, WORKING AND PASSING PLACES
The work environment must answer to the directive 89/654/CEE requirements. In the working area foreign object must not be
present. The employer, in the directive 89/391/CEE respect, concerning the measures realization turned to promote the safety
and workers health improvement during the work, must provide to eliminate or reduce the showed residual risks as foreseen in
the present manual.
WARNINGS ON THE RESIDUAL RISKS
RESIDUAL RISK DUE TO THE FIXED PROTECTIONS REMOVAL, INTERVENTIONS ON BROKEN/WORN
PARTS
For any evenience the operator must not try to open or remove a fixed protection or tamper a safety
device.
In the phase of equipment, maintenance and cleaning, and during all further manual operations that
happens introducing the hands or other body parts in the machine dangerous areas, a residual risk remains due
above all to:
1. Knocks with machine manufacturing parts,
2. Grazing and/or abrasion with machine rough parts,
3. Cut with tools sharpened parts.
Besides, the operator and the maintenance man must be skilled for the intervention connected to the manual
operations with open protections, must be trained on the joined consequent risks and must be authorized from
a responsible person.
ORIGINAL INSTRUCTIONS TRANSLATION
Pag. di
8 18