Programming; Enter In Programming Mode; Programming Menu; Programming Menu Description - aqua HC 997 Serie Manuel De Programmation

HC997-999 – MOD. A
Digital multifunction solenoid metering pump

4.0 PROGRAMMING

4.1 E
NTER IN PROGRAMMING MODE
From the user menu, keep pressed the
To enter press the following key's combination:
4.2 P
ROGRAMMING MENU
* ATTENTION: TO CONFIRM AND SAVE THE PROGRAMMING PRESS THE
BUTTON FOR 5 SECONDS.
4.2.1 P
ROGRAMMING MENU DESCRIPTION
Constant functioning menu
It allows to select among the following functioning modes:
Proportional functioning menu
It allows to select the following functioning modes:
 proportional by external pulses from a water meter 1:N mode
proportional by external pulses from a water meter 1xN mode

proportional by external pulses from a water meter 1xN mode with memory

 proportional by external 4÷20 mA current signal
PPM

Timer functioning menu
It allows to programming the pump in daily or weekly timer mode.
Setting menu – Calibration
This menu allows to set all the functioning parameters of the pump and moreover to calibrate the pump.
ADSP9000026
key for three seconds, the display will show:
With the
choices.
To select the desired choice press
Capacity – Period – Quantity to dose – Cyclical
18/09/2015 Rev.1.5
PROGRAMMING
keys is possible scroll the menu's
key
ENGLISH
26/100