Programming Menu (Admin) - aqua HC151 PH-RX Mode D'emploi

HC151 PHRX
Digital multifunction solenoid metering pump

4. PROGRAMMING Menu (ADMIN)

The PROGRAMMING menu allows you to set all the parameters for functioning the pump. Access to this
menu can only be made by entering the password. Pleasefollow the stepsbelow:

Press and hold the ENTER key from the USER menu

InsertPasword

At this point you are in the PROGRAMMING menu
PROGRAMMING menu is shown below:
DOWN
WORKING MODE
ADSP9500092
PASSWORD
0000
Allows you to set the general parameters of functioning, those
parameters that are common to working modes. To access the
SETUP
SETUP menu, press ENTER key
UP
14/04/2015 Rev. 1.0
Use the Up and Down keys to set the value. Press the
ENTER key to confirm the selection and automatically
moves the cursor to the next value to be inserted. The
value that you are inserting has a flashing cursor. Once
you enter the password press ENTER key.
Allows you to set the working mode (constant, 1xN
...) and its parameters
ENGLISH
33/123