Programming Mode - Proportional Functioning; Proportional By External Pulses 1Xn - aqua HC 997 Serie Manuel De Programmation

HC997-999 – MOD. A
Digital multifunction solenoid metering pump
4.4 P
ROGRAMMING MENU
4.4.1 Proportional functioning by external pulses
4.4.2 Proportional functioning by external pulses 1xN
Press the key to go at the previous menu.
ADSP9000026
– P
ROPORTIONAL FUNCTIONING
In this functioning mode there are two parameters to set:
Number of strokes to perform.

Setting from 0 to 250.
Frequency of the strokes per minute (Str/m).

Setting from 1 to 150 or 180 (depends on the model).
Every time the pump receives a pulse from the water meter it perform the desired
strokes at the programmed frequency.
Example 1xN = 1x15
The pumps gives 15 strokes at 60SPM frequency every time it receives a pulse from the
water meter.
Press the
18/09/2015 Rev.1.5
PROPORTIONAL FUNCTIONING BY EXTERNAL PULSES
Press the
Press the key to select the desired entry.
Press the
Press the key to select the desired entry.
Str/m = 60
keys to set the desired values.
keys to scroll the menu entries.
keys to scroll the menu entries.
ENGLISH
29/100