System Settings - auna Connect 120 Mode D'emploi

EN
Launch the app. The app initializes and scans for Internet Radio in the
network. Tap the device to make the connection.
When prompted, enter the current PIN code. The default PIN is "1234".
You can view and edit the current PIN on the Internet Radio in the menu
Select your desired mode in the main page. You may then control the
selected mode on your smartphone / tablet and on the display of the device
simultaneously.
NOTE: Be aware that if another smartphone / tablet with the app in the
same network have access with the device, the original connection will be
cut off.

SYSTEM SETTINGS

Equaliser
Several preset EQ modes are available: Normal, Flat, Jazz, Rock, Movie,
Classic, Pop, News and My EQ. Press EQ to select.
A user-defined setting is available; create your own EQ with custom bass,
treble settings.
Network
Network wizard: Enter to search AP SSID, then input the WEP / WPA key or
choose Push Button/Pin/Skip WPS to connect to the wireless network.
PBC Wlan setup: Push Button Configuration, it is to connect the AP that
supports WPS (Wi-Fi Protected Setup).
View settings: View the information of current connected network: Active
connection, MAC address, Wlan region, DHCP, SSID, IP address, Subnet
mask, Gateway address,
Primary DNS and Secondary DNS.
Manual settings: Enable or disable DHCP (Dynamic Host Configuration
Protocol). Input the SSID, WEP / WPA key and/or other configuration.
NetRemote PIN Setup: Here you can view and edit the NetRemote PIN. The
default NetRemote PIN is: 1234. The NetRemote PIN is required when you
want to connect a smartphone or Tablet PC to your radio.
Network profile: The device remembers the last four wireless networks it
has connected to, and automatically tries to connect to whichever one of
them it can find. From here you can see the list of registered networks. You
can delete unwanted networks.
40