auna Connect 120 Mode D'emploi page 36

EN
36
• To enter the network's key, use the reel or direction keys on the remote
control to move the cursor through the characters and press "OK/SCAN"
to confirm.
• As each character is selected, the key is built up near the top of the
display.
• There are three options accessible by tuning the navigate reel back
before the first characters – Backspace, OK and Cancel.
WPS
There will be hints for the type of network – if your network device supports
WPS function.
Use one of the following methods of connection:
• Push button: The device prompts you to press the connect button on
the router. It then scans for a ready Push Button Connect network and
connects.
• Pin: The device generates an 8-digit code number which you enter into
the wireless router, access point, or an external registrar.
• Skip WPS: Enter key as for a standard encrypted network.
• For more information on setting up a WPS encrypted network, see your
WPS router's instructions.
• Device attempts to connect to the selected network.
• It will show "connected" if the setup is successful.
• If connecting fails, it returns to a previous screen to try again. Once
completed, press OK/SCAN to quit the setup wizard.
Internet Radio, Podcasts
Device can play thousands of radio stations and podcasts from around the
world though a broadband Internet connection. When you select Internet
radio or Podcasts mode, the device directly contacts the Frontier Smart
Technologies portal to get a list of stations or podcasts.The list menu
is provided from the portal, so it is only accessible when the device is
connected to the Internet. The contents and submenus may change from
time to time. Choose required category and search the station or podcast to
listen.