auna Connect 120 Mode D'emploi page 43

WiFi connection cannot be
established.
No station is found.
Hiss in FM mode
No stations available /
burbling / intermittent in
DAB mode
Alarm does not work.
All other undetermined
cases.
1. Check the availability of WLAN
network on the router.
2. Place the device closer to the router.
3. Make sure the password is correct.
1. Check the network as well as the
access point and firewall.
2. The station may not be available
currently, try again later.
3. The link of the station is changed or
the station no longer transmits – ask
the provider for information.
4. The link of manual added station may
not be correct, check and change it.
1. Check/move the FM antenna.
2. Move the radio.
1. Move the radio.
2. Rescan local stations only (high-
strength).
3. Check the local DAB coverage.
1. Switch on the alarm.
2. Due to the volume setting, refer to the
solutions of "No sound".
3. The source of alarm was set to be
station but there is no network
connection. Change the source of
alarm or reconfigure the connection.
The smart radio may process large amount
of data after a period of operation, no
matter in which mode, it will cause the
system freeze or malfunction.
Reboot the device if necessary.
The normal function of the product may
be disturbed by strong Electro-Magnetic
Interference. If so, simply reset the product
to resume normal operation by following
the instruction manual. In case the function
could not resume, please use the product
in other location.
The device may malfunction when used in
areas with strong radio interference. The
device will work properly again once there
is no more interference.
EN
43