Operation; Now Playing Information - auna Connect 120 Mode D'emploi

EN
34

OPERATION

On the playing screen, rotate the volume knob or press
remote control to adjust the volume. Switch off the sound by pressing
the remote control.
• Press MODE on the device/remote control to select modes.
• Press MENU to open the menu. Press again to close the menu and
return to playing screen.
• On the menu, rotate the knob or press / on the remote control to
move along the entries.
• Press OK/SCAN to confirm. Press
control to step back.
• Press the volume knob on the device or press
to switch to standby mode. The time, date and any active alarm times
display on the screen. Switch on with the same button.
• When album cover is displayed on the playing screen, press OK (SCAN)
to view the full screen size of the picture. (This feature may need
software update, contact us if required.)
Presets
• Presets are stored in the radio and cannot be accessed from other
radios.
• To store an Internet radio preset, press and hold FAV until the display
shows the Save preset screen. Select one of the 10 presets to save the
currently playing station.
• Shortcut to preset store 1-10 favourate stations by directly pressing and
hold numbers directly on the remote control.
• To select a preset, press FAV , then select one of the listed preset
stations. When a preset station is playing, it shows
bottom of the screen. Shortcut to preset recall 1-10 favourate stations by
directly pressing numbers "1-10/0" directly on the remote control.

Now playing information

• While stream/DAB/FM is playing, the screen shows some information
about the station, press INFO to view.
• The device may process large amount of data after a period of
operation, no matter in which mode, it will cause the system freeze or
malfunction.
• Reboot the device if necessary.
/
on the device or on the remote

on the remote control
n (
 
on the
on
1, 2 etc) at the
