Aux In; Usb - auna Connect 120 Mode D'emploi

EN
38
• Audio settings: All stereo stations are reproduced in stereo. For weak
stations, this may result in a poor signal-to-noise ratio (hiss). To play
weak stations in mono, select FM weak reception: Listen in mono only
and then YES.
BT
In BT mode, you can turn on the BT of your BT device. Go to the menu and
turn BT discoverable. From your BT device, search the radio "CONNECT 120"
to pairing. When it is waiting for pairing, there is a blinking BT icon at the
bottom. If the pairing is successful, the BT icon becomes steady.
Control the music playback from your BT device. Press / on the remote
control to go back to forward track or go to next track. Press
pause the track.
To disconnect from the radio, press and hold BT PAIR on the remote control.

AUX IN

AUX in mode plays audio from an external source.
Turn the volume low on both the radio and, if adjustable, the audio source
device.
Enter AUX mode, then adjust the volume as required.

USB

USB mode plays audio from the USB stick/device after plugging into the
USB port.
Menus are generated from the folders on the USB stick/device. Browse
folders with the navigate reel, back button, shuffle/repeat or direction
keys on the remote control. The display shows folder and file names (not
necessarily track names}.
Once you have found a track you want to play, press OK to play. It can be
added to "My playlist, press and hold OK when the track is playing.
Note:
USB port does not support charging.
Only MP3 audio format supported.
to play or

