System Settings - auna iTuner CD Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 71
EN
48

SYSTEM SETTINGS

Press the MENU button to display the menu, press the PRESET
to select System settings and then press the SELECT button to confirm.
Equalizer
This system supports a variety of equalizers and sound effects.
Press the EQ button to access the Equaliser menu
Alternatively:
During System settings mode, press the PRESET
Equaliser and then press the SELECT button to confirm.
1. The display will show : FLAT > CLASSIC > ROCK > POP > JAZZ
∧/∨
2. Press the PRESET
button to confirm.
Network
1. During System Settings mode, press the PRESET
Network and press the SELECT button to confirm.
∧/∨
2. Press the PRESET
then press the SELECT button to confirm.
Network wizard
PBC Wlan setup
View settings
Wlan region
Manual settings
NetRemote PIN Setup
Network profile
Keep network connected
buttons to select and then press the SELECT
buttons to select from the following settings, and
SSID – select the desire wireless network.
Rescan – Scan for available networks.
Manual config – select wireless network
with DHCP enable/disable.
Select PBC on the unit and press the PBC
button on the modem device that you
wish to connect with. Press the ENTER
button to continue.
Display the setting on the unit.
Select a country of your choice.
Select wireless network with DHCP enable/
disable.
Allows you to define a PIN number to be
entered before being able to connect the
device remotely over a network.
View the connected network..
Allows you to define whether the device
remains connected to its network in Standby
mode and when not in Network radio mode.
∧/∨
buttons
∧/∨
buttons to select
∧/∨
, buttons to select

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1003275310032754

Table des Matières