System Settings - auna Commuter Mode D'emploi

Station information in DAB mode
Each time the INFO button is pressed in DAB mode, the following modes
are displayed on the screen in the following order
• Signal Strength: A bar indicating the current station strength appears
on the screen
• Signal Error: Details of the signal error rate are displayed on the screen
• Station frequency: The station number and frequency are displayed on
the screen
• Programme Type (PTY): the type and description of the DAB+ station
you have tuned in is displayed
• Time and date: The time and date provided by the transmitter are
displayed on the screen
• Bitrate: The bit transmission speed of the signal is displayed on the
screen
• Radiotext (DLS): The information text provided by the station is
displayed on the screen

SYSTEM SETTINGS

Set time/date
• Set the date, month, year and time with the
OK button to confirm.
• Select Auto Update/No Update.
• Select 12 or 24 hour format.
• Select DD-MM-YYYYY or MM-DD-YYYYY as the date format.
Alarm clock
• Select Alarm 1 or Alarm 2 and press OK to confirm.
• Then activate the selected alarm and set the alarm time, frequency,
source and volume of the alarm. Press OK to confirm your selection.
/ buttons, and press the
EN
23