Cleaning - ZUMEX Essential Basic Manuel De L'utilisateur

Cleaning

For correct cleaning you must follow the steps below:
Step 1 Turn the machine off at the mains.
Step 2 Disassemble the front cover.
Step 3 Disassemble the blade holder (Fig. 7), pulling it towards you by the handle.
Be careful! Handle this part with great care as you may cut yourself.
Step 4 Remove the peel ejectors from their supports (Fig. 8).
Step 5 Disassemble the pressing units in pairs after unscrewing the securing knobs (Fig. 9).
Step 6 Disassemble the container and the juice ilter (Fig. 10).
Step 7 Disassemble the faucet (Fig. 11A).
All the parts EXCEPT FOR THE COVER are dishwasher safe.
·
When cleaning the squeezing and cover area you should use a soft cloth dipped in
·
water and washing-up liquid. Then rinse thoroughly in clean water so no soap remains.
Once the cleaning process has inished, you must assemble all the elements in
·
reverse order to their disassembly. Make sure that all the parts have been correctly
assembled and secured.
Remember that each peel ejector (Fig. 8) only its on one side and so they are not
·
interchangeable. When you place them make sure that you insert the peel ejector
paddle right down to the end of the lower pressing unit.
In order to avoid the accumulation of wax it is important to clean the fruit feeder
·
frequently of Zumex Versatile Pro models.
On models with a base stand clean the hopper and the inside of the stand, making
·
sure to eliminate any peel or pulp remains.
Usage Instructions
50
English