ZUMEX Essential Basic Manuel De L'utilisateur page 44

The choice can be made using the arrows and pressing "ON". Once selected, the
machine will be ready for operation in "Self-Service" mode.
As a general rule, to operate within the menu, we can regard the "ON" button as
accept and "OFF" as cancel.
Operating Modes with Zumex Essential Pro
Zumex Essential Pro can work in two operating modes:
Autostart: The machine detects the oranges in the feeder tube and starts up as the
oranges pass by.
Self-service: The machine starts up by activating the self-service faucet either by
pressing the faucet or by activating the switch lever; in order to be able to operate
with this switch lever see Fig. 9A and 9B. In this mode you can also work continuously
by turning the faucet block 90º (Fig. 13).
Selection of operating mode:
Step 1 Press the MENU key for a few seconds to enter the programming mode.
Step 2 Select the WORKING MODE option by positioning the
over it and pressing ON to conirm your selection.
cursors
Step 3 Select the desired working mode, Autostart or Self-Service using the cursors
and press on to conirm your selection. Press OFF several times until you exit MENU.
Operating Modes with Zumex Versatile Pro
Zumex Versatile can operate in two working modes:
Professional: You can programme the no. of oranges to be squeezed in each cycle
using the cursors , and you can programme up to 20 oranges in each cycle or se-
lect the 'c' option to squeeze continuously. The squeezing will start by pressing 'ON' and
it will end after ceasing to squeeze the no. of oranges programmed or if you press 'OFF'.
Self-service: The machine starts up by activating the self-service faucet either by
pressing the faucet or activating the switch lever. You can also work continuously in
this mode by turning the faucet block 90º (Fig. 13).
English Usage Instructions
43