Screen Messages; Ce Declaration Of Conformity - ZUMEX Essential Basic Manuel De L'utilisateur

Screen Messages

Display message
Excess current.
No oranges.
Memory initiated.
Calibration.
Out of service.
EEPROM
Out of range .
Keyboard error (Error 1).
Juice tray picture
lashing.
* The message: "Keyboard error" may not appear on the display as there is no communication between the CPU and the keyboard panel-

CE Declaration of Conformity

ZUMEX GROUP S.A., whose registered ofices are situated at Polígono Industrial de
Moncada III, C/ Molí, 2 - 46113 Moncada, Valencia (Spain) does hereby declare, under
its sole responsibility, that the Essential Basic - Essential Pro - Versatile Pro juicer
machine models conform to the following harmonised standards:
EN ISO 12100-1
2003
EN ISO 12100-2
2003
EN 60335-1
2002
Screen Messages · CE Declaration of Conformity
54
Cause
The maximum electrical consumption level has
been exceeded for at least one second.
The motor remains on for two minutes
detecting any squeezing.
Se detecta un error en la memoria.
A memory error has been detected.
The counter has reached zero.
Error detected in EEPROM memory
The input power voltage is less than 80V
or greater than 260V.
No communication with the keyboard (Internal fault).
Check the juice tray and front cover are
placed correctly.
Machine safety. Basic concepts, general principles for design. Part 1: Basic
terminology, methodology.
Machine safety. Basic concepts, general principles for design. Part 2:
Technical principles.
Safety of household electrical appliances and similar. Part 1: General
requirements.
Solution
Turn off at mains and turn
back on again.
Put oranges back in feeder again
without and press ON.
Contact your technical service.
Calibrate (See page 18).
Modify the discounter value as
indicated in page 19 or move on to
counter function entering PARTIAL
COUNTER and pressing ON.
Contact your technical service.
Contact your technical service.
Contact your technical service.
Place the tray and cover in its correct
position as Fig. 4. If the picture does not
disappear, contact your technical service.
English