ZUMEX Essential Basic Manuel De L'utilisateur page 47

· Calibrate: Select CALIBRATE and press ON. Next, set your PIN number and press
ON. The machine will ask for conirmation: 'Calibrate?', press 'ON' to conirm the
automatic calibration. The machine will then carry out said calibration and dis-
play the adjusted calibration value. Return to the menu, pressing OFF.
This option must only be carried out under the supervision of the Technical Servi-
ce and when it has been speciically indicated.
Pin: Your juicer has a password so you can access the counters and modify conigu-
ration parameters. The standard programmed PIN is 0000 but you can personalise
this PIN. On the TECHNICAL SERVICE menu select PIN and press ON to conirm your
selection. If this is the irst time you have changed your PIN, the standard PIN 0000
will appear and press ON; if you have already programmed a password previously,
enter the old password, use the cursors
from digit to digit and ON to conirm the password. Upon entering the correct PIN the
"New PIN" screen will appear. Programme the new password, select each digit with
the cursors
If you forget the Pin number programed, you will be required to reset machine's
MENU. In order, to do that, enter CONFIGURATION press
press button simultaneously.
Counters: You can control the counter and discounter of your juicer. The counter
allows you to establish the no. of oranges squeezed, the discounter function allows you
to programme a given no. of oranges and gradually consume oranges from this total.
· Partial counter: This shows you the no. of oranges consumed and it can be set to zero.
On the TECHNICAL SERVICE menu select COUNTERS > PARTIAL COUNTER
and press ON to conirm your selection. Enter your PIN (Remember: Select each digit
with the cursor
sword). You can view the number of oranges squeezed on the screen. To set the counter
to zero press
counter has been set to zero. Return to the menu, pressing OFF repeatedly.
Usage Instructions
46
, press OFF to move from digit to digit and ON to conirm the new PIN.
, press OFF to move from digit to digit and ON to conirm the pas-
and conirm using ON and on the machine display you will see that the
English
to select each digit, press OFF to move
button, and while pressed,