Additional Functions; Transposition; Midi Settings; Transmission Modes - Key B Organ Viscount Legend Solo Mode D'emploi

User Manual

6.1 TRANSPOSITION

The keyboard can be transposed within a range of -6 / +5 semitones.
To set the transposition, while holding the [TRANSPOSE SELECT] button, press one of the keys from F#1 (-6
semitones) to F2 (+5 semitones). C2 corresponds to no transposition.
When the [TRANSPOSE SELECT] button's led is on, this means that the keyboard is transposed.
NB
Transposition is also applied to the notes received through the [MIDI PEDALS KEYB ONLY] connector, but not to the
notes received through the [MIDI IN] connector.

6.2 MIDI SETTINGS

TRANSMISSION MODES

Legend Solo
As seen in par. 3.2,
are sent differently and depending on the selected operating mode. Four operating modes of the MIDI
transmission ports are provided:
-
MUTE: designed to play the
-
EXPANDER: useful for playing an external sound generator (Expander) with the
-
SEQUENCER: useful for recording the songs played on the
-
MASTER KEYBOARD: useful for controlling external devices with the keyboard and the controls of
Solo
The following table shows the MIDI messages transmitted on each MIDI port depending on whether you have
selected a Set, Preset, Cancel or Layer mode:
Port
[OUT 1]
[OUT 2]

6. ADDITIONAL FUNCTIONS

-6 -5 -4 -3 -2 -1
G1 A1
are equipped with two ports for transmitting MIDI data on which messages
Legend Solo
and no other external connected expander or instrument
Preset or Set
MUTE mode:
No MIDI data transmitted
SEQUENCER mode:
Notes with fixed velocity (100)
All the Control Changes provided by
the instrument (see the MIDI
Information section)
EN - 18
0 +1 +2 +3 +4 +5
B1 C2 D2 E2 F2
Legend Solo
Control Change Expression ([EXP]
pedal), Sustain ([HOLD pedal]),
MASTER KEYBOARD mode:
All the Control Changes provided by
the instrument (see the MIDI
Legend Solo
keyboard
with an external Sequencer
Cancel or Layer
EXPANDER: mode
Notes with velocity
All Notes Off (123)
Notes with velocity
Information section)
Legend