Factory Preset; Troubleshooting - Key B Organ Viscount Legend Solo Mode D'emploi

7.2 FACTORY PRESET

Upper Presets
Button Registration
1 00 5320 000
2 00 4432 000
3 00 8740 000
4 00 4544 222

7.3 TROUBLESHOOTING

The instrument does not switch on.
-
Check that the external power supply is connected to the instrument and the power cable is properly
plugged in the socket.
-
Make sure that the power socket is working.
The instrument makes no sound.
-
Check that the [VOLUME] potentiometer on the front panel is not turned to the left.
-
Check that the expression pedal connected to the [EXP] connector on the rear panel is not set to minimum
(fully raised).
-
Check that in the drawbars Set with which you are playing, there is at least one drawn drawbar.
-
Check that the Cancel function is not enabled (see par. 4.1).
-
Check that no jack is connected to the [FX RETURN] port on the rear panel, unless a jack is also
connected to the [FX SEND] port.
The sound is distorted or you hear noise from the speakers.
-
Decrease the volume.
-
The distortion effect has been activated through the [DRIVE] potentiometer on the front panel. If you do not
want to apply a distortion, turn the potentiometer to the far left.
The reverb effect is not present in the [ROTARY SPEAKER] output.
-
Set the PRE mode of the Reverb effect (see section 5.2).
The instrument is not in tune with the others.
-
Adjust the pitch with the [TUNING] trimmer on the front panel.
The expression pedal has no effect.
-
Verify that the pedal cable is correctly connected to the [EXP] connector on the rear panel and that it is not
damaged.
The switch pedal(s) have no effect.
-
If you want to control Rotary speed check that the cable is properly connected to the [ROTARY] port.
-
If you want to use the Hold function (Sustain) check that the pedal cable is connected to the [HOLD]
connector.
-
Check if the connection cable is damaged.
The pedal(s) work in reverse.
-
Make sure not to switch the instrument on with the pedals pressed.
One or more of the following controls / effects do not seem to work.
-
Pedals: Assigned to the [PEDALS] output of the rear panel (see section 2 of section 3.2).
-
Pedals: If you play with the keyboard, check that the LED of the [PEDALS TO LOWER] button is lit.
-
Rotary: Excluded from the [LEFT], [RIGHT] and [PHONES] audio outputs (see section 23 of section 3.1).
Name
Stopped Flute
Dulciana
French Horn
Salicional
EN - 23
Lower Presets
Button Registration
1 00 4545 440
2 00 4432 220
3 00 7373 430
4 00 4544 222
User Manual
Name
Cello
Flute & Strings
Clarinet
Salicional