General Safety Directions For Power Tools - Parkside PWS 125 D3 Traduction Des Instructions D'origine

GB IE
Safety class II
Electrical machines do not belong
with domestic waste.
Other symbols on the
cutting disc:
Do not use for side grinding
Do not use for wet grinding
Do not use defective discs
Suitable for metal
Wear safety shoes
Symbols used in the instructions:
Hazard symbols with in-
formation on prevention of
personal injury and property
damage
Precaution symbol (explanation of
precaution instead of exclamation
mark) with information on preventi-
on of harm / damage.
Notice symbol with information on
how to handle the device properly.
General Safety Directions
for Power Tools
WARNING! READ ALL SAFETY
DIRECTIONS AND INSTRUC-
TIONS. Omissions in the compli-
ance with safety directions and inst-
ructions can cause electrical shock,
fire and/or severe injuries.
2 8
Retain all safety directions and ins-
tructions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool).
Work area safety :
• Keep work area clean and well
lit. Cluttered or dark areas invite acci-
dents.
• Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
• Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
Electrical safety :
CAUTION! The following states
how to avoid accidents and injuries
due to electric shock:
• Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools. Unmo-
dified plugs and matching outlets will
reduce risk of electric shock
• Avoid body contact with earthed
or grounded surfaces, such as
pipes, radiators, ranges and ref-
rigerators. There is an increased risk
of electric shock if your body is earthed
or grounded.
• Do not expose power tools to
rain or wet conditions. Water