Selecting The Screen Mode (Mps-V500P Only) - Sony MPS-V500 Mode D'emploi

Selecting the screen mode (MPS-V500P only)

You can select the screen mode so that the picture is displayed on the full LCD screen.
1
Press the MENU key repeat-
edly to display the OPTION
screen.
About the screen modes
WIDE: Default setting. The picture is zoomed
and displayed fully on the screen. The
picture quality is slightly impaired.
NAR (narrow): The black border is displayed
around the picture. The picture is small,
but of high quality (when zooming is not
used).
Note
The illustrations of the OPTION screen on the
other pages of this manual show that of the MPS-
V500 which is not equipped with the SCRN
MODE option.
2
Press the
the cursor (z) to
MODE" and press the ZOOM
+/– keys to select WIDE or
NAR.
See "About the screen modes" below.
3
Press the EXEC/ROTATE key
to cancel the OPTION screen.
The picture is displayed in the selected
screen mode.
MPS-V500/V500P (U/C/CED/GA).3-856-662-11 (1).EN
/ keys to move
"
SCRN
9
(EN)