Displaying A Picture - Sony MPS-V500 Mode D'emploi

Playing a Picture MD

Displaying a picture

Press the ^ key.
5
The first picture in album 1 appears on
the screen.
Album number Picture number
z
Cont
Narration indicator
Picture title
(Appears only for a
picture with a narra-
tion recording. )
To make the character information
disappear
Press the DISPLAY key. The picture title, album
number and picture number disappear and
only the picture is displayed on the screen. To
restore the character information, press the
DISPLAY key again.
To adjust the brightness
Press the BRIGHT + or – key to adjust the
brightness. The picture becomes brighter by
pressing the + key, and darker by pressing the
– key.
6
(EN)
Displaying the next picture
z
Press the + key once rapidly.
Displaying back to the previous
picture
Press the = key once rapidly.
Displaying the desired picture in
the same album
Press the + or = key until the desired
z
picture number appears.
The selected picture will appear.
To turn off the LCD
Press the LCD ON/OFF key. The LCD screen
is turned off. The power consumption
decreases and a longer battery life is expected.
This function is convenient when an external
monitor is used. To turn on the LCD, press the
LCD ON/OFF key again.
DISPLAY key
About the LCD standby
If you do not operate the unit for a specified
period of time, the LCD screen is automatically
turned off (LCD standby function). The LCD is
turned on again by pressing a key. You can
BRIGHT +/– keys
select the time after which the LCD goes into
standby mode among 5, 10, 20 and 30 minutes,
or select the LCD standby function OFF. (See
page 19.)
MPS-V500/V500P (U/C/CED/GA).3-856-662-11 (1).EN
LCD ON/OFF key