Checking The Orders - Sony MPS-V500 Mode D'emploi

6
Press the CANCEL/MIRROR key to make the
ORDER screen disappear.
7
Repeat steps 1 to 6 for each picture to be
printed.
Recordable number of orders
You can record up to 1483 orders on an MD. The number of
orders may vary if you use other equipment to write orders.
When the disc is full of orders, the "ORDER FULL" message
appears.

Checking the orders

1
Display the ORDER screen and move the cursor (z) to "EDIT."
2
Press the EXEC/ROTATE key.
The EDIT screen appears and you can see a list of the
orders recorded on the MD.
PIC_NO: Picture number
SIZE: Print size
QTY: Print quantity (number of prints)
C: "*" means that the picture is cropped.
P: "*" means that the picture has been printed.
P RESTOR: See page 23.
If there are more than 5 orders
The last 5 orders are displayed initially on the EDIT screen.
Press the keys to scroll the screen to see previous orders.
To display a picture in the order list
/
Press the keys to move the cursor (z) to the line of the
desired picture, and press the ^ key. The picture appears on
the screen, showing the cropping condition if you have cropped
it when recording the order.
To cancel the EDIT screen
Press the CANCEL/MIRROR key once to return to the ORDER
screen, or twice to return to the picture display.
MPS-V500/V500P (U/C/CED/GA).3-856-662-11 (1).EN
Note
Do not disconnect the battery or
DC cord during recording. Doing
so may damage the data on the
MD.
Error message
If the battery is too weak to record,
"LOW BATT" appears. Replace it
with another battery or recharge it.
Number of unprinted
orders
Number of all the orders
21
(EN)