Operating Instructions - Audiovox VME 9114 TS Instructions

Parking Brake Inhibit
• When the "PRK SW" cable is connected to the brake switch, the display on the TFT monitor will display video only when the vehicle is applied.
• Parking brake function is overridden when the video source is set to CAMERA.
Mute
Press the rotary encorder to mute the volume from the unit. Press the rotary encorder again to restore the volume. "MUTE" is displayed on the LCD.

OPERATING INSTRUCTIONS

Power On / Off
Press the /SRC button (7) on the unit to turn the unit on. The buttons on the front of the unit light up. Press and hold the
the unit. The monitor is drawn back into the main compartment.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The Beep tone can be disabled through the Setup menu.
Playing Source Selection
To access the SOURCE MENU, touch the top left corner of the screen or press the SRC button on the front panel (7). Use the touch screen to change
the source through the SOURCE MENU.
Volume Adjustment
To increase or decrease the volume level, turn the rotary encoder (6) on the front panel. When the volume level reaches "0" or "40", a beep sounds, indi-
cating that the adjustment limit has been reached. The volume ranges from "0" to "40". The LCD or TFT screen displays the volume level for 3 seconds.
Programmable Turn-On Volume
This feature allows the user to select a turn-on volume setting regardless of the volume setting prior to turning the unitoff. To program a specific turn-on
volume level, turn the rotary encoder (6) to adjust the volume to the desired turn-onvolume. Push and hold the AUDIO button while the yellow speaker
icon and level indication is displayed on the screen.The unit will beep two times to confirm your turn-on volume setting.
Audio Control Menu
The Audio Control feature allows you to easily adjust your audio system to meet the acoustical characteristics of your vehicle, which vary depending on
the type of vehicle and its measurements. Proper setting of the Fader and Balance boosts the effects of the cabin equalizer. Press the EQ button on the
touchscreen once to display the audio menu. To adjust an audio feature:
Function Adjustment option
EQ User
Rock
Hip Hop
Dance
Latin
Rave
Urban
Acoustic
FAD-BAL By push at the gridfield you can adjust the Fader/Balance accordingly.
Adjustment of Bass/Mid/Treble seperately available
By push at the "EQ"-field you can choose between the pre adjusted EQ´s
11
button to power off