Technical Characteristics; Frame Installation; Drive System - Villager V 722 Mode D'emploi

Villager

2 TECHNICAL CHARACTERISTICS

Gasoline engine
Volume
Engine speed
Mowing width
Max vibration value

2.1 Frame installation

 Front frame: Rectangular tube 40x30x2.5 (mm)
 Thickness (engine frame steel panel) 2.5 mm
 Fuel tank: 2 gallons (7.6 L) plastic fuel tank
 Drive wheel: 13x5" two-layer pneumatic tubeless
 Wheel 8x3", smooth, pneumatic tubeless

2.2 Drive system

 Type: Belt drive with double drive belts for increased friction on the belt
surface.
 Transmission 3 transmission speeds
 Control management/movement Clutch/brake control by tip of the toes, key
switch.
 Brakes: One brake on each wheel.
 Safety group: A hand-operated operator presence system, with a blade clutch
and a transmission lock to shut down the engine.
 Forward speed range: 0-4,38mph (0-7 km/h).
Cutting housing
 Type: Floating housing
 Actual mowing width: 28" (71.1cm)
 Blade turn on: Manual control
 Adjusting the mowing height: Manual adjustment of 1.5" (3.8cm) to 4.0"
(10.16cm) in 0.5" (1.27cm) shifts.
 Cutting blades: 0.2" (5mm) thickness, two blades 14.5" (36.8cm).
 Cutting housing belts: Flat belt
 Synchronous belt: 1200-8M
6.83 KW
3
344 cm
-1
2800 min
711 mm
2
ah,W=5.5m/s
13
V 722 (GB)
2
K=2.2m/s