Operating Your Appliance - AVG PRYMO PMC30SS Manuel D'instructions

4. OPERATING YOUR APPLIANCE

TEMPERATURE CONTROL AND DISPLAY
1. When the unit is first plugged in, the indicator will light for 3 seconds (indicating ) and an audible beeping
signal will be heard.
2. The zone temperature will be displayed.
3. The temperature in the zone can be set between 39° F to 65° F (4° C to 18° C).
4. The zone temperature may have a difference of +/-5° F (+/-3° C) from the programmed setting depending on
loading and ambient conditions.
NOTE: If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting. If you attempt to restart
before this interval, the wine cooler (compressor) will not start. When restarting after a power failure, the last setting will be
recovered automatically. When using the wine cooler for the first time or restarting the wine cooler after having been shut off for
a long time, there could be a variance of a few degrees between the temperature you select and the one indicated on the LED
readout. This is normal. Once the wine cooler is running for a few hours, everything will be back to normal.
HOW TO OPERATE THE UNIT
ON/OFF
Press this key for turn on and turn off appliance. Press and hold for at least three (3) seconds.
INTERIOR LIGHT
To turn on or off the interior light, press this key once. The interior light will stay on if it is not turned off.
LOCK/UNLOCK FUNCTION
This unit has a lock/unlock function. If the appliance does not receive instructions from the user after 12 seconds, every
key in the control panel will be automatically locked. To unlock, press and hold the two (2) temperature control keys
at the same time for at least three (3) seconds.
TEMPERATURE SETTING (COLDER /WARMER)
Under normal conditions, the temperature display will flash and indicate the current temperature of the unit. When
pressing either keys , the temperature displayed will decrease or increase in increments of one degree. If the
colder key or the warmer key is pressed and held for one second, the temperature displayed will decrease
or increase by one degree for each one second held. The temperature display will flash five (5) seconds after the
temperature has been set and revert to the current temperature.
FAHRENHEIT / CELSIUS SETTING (°C/°F)
he temperature display can be changed between Celsius and Fahrenheit by pressing this key.
T
29