Customization Of Settings By The User - Dalla Corte evo2 Notice Pour L'utilisateur

Customization of settings by the user

• Several settings can be programmed accessing
the MENU section from the main screen - like, for
instance, steam boiler enabling/disabling or week-
ly timer enabling.
• Pushing the MENU button, then, the following
screen is displayed:
• Push (PD3) to access this menu.
1-1 Password
• Push (PD3) to access the USER password level.
54
1-1 User
• Use (PD1) and (PD2) to select User and push (PD3)
to enter user password (default password 0000).
• Use (PD1) and (PD2) to change the digit and (PD3)
to confirm it.
• Once the last of the four digits has been confirmed,
the main menu will be displayed.
• Once the User password has been entered, the
main menu allows the user to access menu '3. Boi-
ler enabling' and '4. Timer set-up'.
3. Boiler enabling
This menu is used to turn on/off manually the main
steam/hot water boiler.
• Push (PD3) to access the menu.
The boiler is enabled by default.
• Push (PD3) to highlight boiler mode.