Alarm Control - Dalla Corte evo2 Notice Pour L'utilisateur

Alarms
This machine is equipped with an electronic control
system that manages all machine functions and
controls the correct functioning of all parts.
If an anomaly takes place, it is recorded and/or dis-
played on main screen through a warning message.
WARNING
An alarm can be triggered by an improper use of
the machine. In this case, it will be sufficient to
correct its improper use to solve the problem.
Some alarms are displayed but not stored in sys-
tem memory because they are non-influential for
the proper functioning of the machine and, more
importantly, for the user's safety. These alarms will
be marked with "A".
Other alarms, which refer to anomalies affecting
safety or the correct functioning of a part, are
displayed and recorded with their triggering date
and time. These alarms can block the anomalously
working part and are marked with „ABP".
Only some alarms can cause machine total block
and will be marked as „ABT".
58
Type "A" alarms
Gr.1 time-out
CAUSE
This alarm is triggered when an extraction is made
on group 1 through the P5 'continuous pouring'
button for more than 120 seconds.
EFFECT
Group is turned off; push DEL on display to delete
the alarm.
Gr.2 time-out
CAUSE
This alarm is triggered when an extraction is made
on group 2 through the P5 - 'continuous pouring'
button for more than 120 seconds.
EFFECT
Group is turned off; push DEL on display to delete
the alarm.
Gr.3 time-out
CAUSE
This alarm is triggered when an extraction is made
on group 3 through the P5 – 'continuous pouring'
button for more than 120 seconds.
EFFECT
Group is turned off; push DEL on display to delete
the alarm.
Gr.4 time-out
CAUSE
This alarm is triggered when an extraction is made
on group 4 through the P5 – 'continuous pouring'
button for more than 120 seconds.
EFFECT
Group is turned off; push DEL on display to delete
the alarm.