Panasonic REAL PRO Elite EP3513 Mode D'emploi page 16

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Erasing Recorded Data
1. Turn on the
2. Press the button corre-
power.
sponding to the data
you wish to delete.
user
Only the button
pressed lights up.
user
Additional Information
About the Focus Function
Number of Times an Action Is Repeated
• Action in progress when the Focus button
is pressed is repeated twice.
(The duration of the program will not be
extended.)
Additional Information
About the Massage Position Adjustment Function
Range of Roller Position button
Vertical or lateral adjustment by pressing up to
2 times in any direction (up, down, left or right)
neck / back
roller position
Two Times
Two Times
Two Times
Two Times
The above adjustments cannot be made in the
case of certain massage actions or massage on
certain of the body.
28
All manuals and user guides at all-guides.com
3. When the Program Selection
4. Press the button once
buttons light up...
again while it is flashing.
user
Press the same button again
and hold for 3 or more
Change to steady light
seconds.
indicates completion.
user
user
Flashing
user
Memory Available for Recording Repeated Actions
• Eight repeated actions can be memorized.
• After 8 actions, new ones are recorded by overwriting the
oldest action in memory.
The pre-program massages were created based on
massages practiced by professional massage therapists in
accordance with the aim of each program. The user
memory function preserves the basic massage actions of
these programs and allows them to be used as a base
upon which to build personalized massages. For this
reason, the maximum number of repeated actions that may
be recorded is eight, so that a massage cannot be focused
on one area of the body. Please use either the self program
or manual operation when you want a massage that
focuses on a particular area of the body.
Adjustable Range
Vertical movement: 0.9 in. (2.4 cm) (up and down)
Lateral movement: 0.4 in (1.0 cm) (left and right)
Approx. 0.9" (2.4 cm)
0.5" (1.2 cm)
0.5" (1.2 cm)
Approx. 0.4"
(1.0 cm)
0.2"
(0.5 cm)
Approx. 0.9" (2.4 cm)
USING MANUAL OPERATION (Upper Body)
Recommended for focused massage using preferred actions on specific parts of the body.
Manual Operation for Massage of the Upper Body
Please open the controller cover to use in manual operation.
1
2
Back Vibration OFF/ON button
Massage Strength button
1. Press
2. Select your massage action of preference.
Selection of Massage Actions
• The LED above the selected massage will light up.
• The icon of the button pressed will light up on the display.
• Massage actions are combinable. (Massage actions indicated by the
combined with one another.)
Pressed One Time
Pressed Two Times
Pressed Three Times
Body scanning will commence when
Approx. 0.4"
(1.0 cm)
• When you feel a light tapping sensation on your shoulders, always check the shoulder position and when necessary adjust
0.2"
(0.5 cm)
it manually. (See Page 16)
pre-programs
off/on
shiatsu
deep
swedish
stretch
time remaining
user
intensity intensity
intensity speed
hands /arms
lower body
upper body
A
B
A
B
A
B
A
B
A
B
A
B
A
B
knead
knead shiatsu
knead
swedish compression
tap
leg stretch
vibration
position
intensity intensity intensity speed
hands/
lower
upper
arms
body
body
Massage Speed
Roller Position
Adjustment button
to turn on the power.
Shiatsu
Kneading
Swedish
Compression
A B
A B
A B
shiatsu
knead
swedish
Shiatsu A
Knead A
Swedish A
Compression A
Shiatsu B
Knead B
Swedish B
Compression B
• An action combined with another can be toggled off by pressing its button.
• An action being used alone can be toggled back on by pressing its button once.
full regional
roll
is selected.
ottoman reclining
quick
self program
self program
voice
time
self program time input
full regional
roll
neck/shoulder hands/arms
back
lateral
lower back
OK
lower body
Lateral Movement button
button
area in chart below cannot be
Tapping
Rolling
full regional
A B
A B
compression
tap
roll
Tap A
Full
Tap B
Regional
29

Publicité

Table des Matières
loading

Table des Matières