Information Regarding Ul; Field Wiring Power Terminals; Short Circuit Current Rating - Sew Eurodrive MOVIDRIVE Notice D'exploitation

4.15

Information regarding UL

REMARQUE
Le chapitre suivant est toujours en anglais, indépendamment de la langue de la pré-
sente documentation et ce en raison des prescriptions UL.
4.15.1

Field Wiring Power Terminals

•
•
•
MDP90A-...-
0100 (size 1) X1
0100 (size 1A) X1
0250 X1
MDA90A-...-
0020 – 0120 X2
0160 – 0240 X2
0320 – 0480 X2
MDD90A-...-
0020 – 0040 X2
0020 – 0080 X2
X4
4.15.2

Short Circuit Current Rating

Suitable for use on a circuit capable of delivering not more than
•
Max. voltage is limited to 500 V.
Use 60/75 °C solid or stranded copper wire only sized at 14 AWG minimum. Sui-
table for 1 wire per terminal.
For double axis modules use wire size 12 – 14 AWG.
Tighten terminals to in-lbs (Nm) as follows
Tightening torque in-lbs (Nm)
Line connection
4.4254 – 5.3105 (0.5 – 0.6)
4.4254 – 5.3105 (0.5 – 0.6)
23.552 – 35.403 (3.0 – 4.0)
Motor connection
4.4254 – 5.3105 (0.5 – 0.6)
13.276 – 15.046 (1.5 – 1.7)
23.552 – 35.403 (3.0 – 4.0
Motor connection
4.4254 – 5.3105 (0.5 – 0.6)
13.276 – 15.046 (1.5 – 1.7)
DC link connection
23.552 – 35.403 (3.0 – 4.0
5000 rms symmetrical amperes when protected by fuses and circuit breakers as
described in the tables below.
Power supply module
Braking resistor terminals
X3 4.4254 – 5.3105 (0.5 – 0.6)
X3 4.4254 – 5.3105 (0.5 – 0.6)
X3 23.552 – 35.403 (3.0 – 4.0)
Single-axis module
-
-
-
Double-axis module
-
-
All modules
23.552 – 35.403 (3.0 – 4.0
Notice d'exploitation – MOVIDRIVE
Installation
Information regarding UL
-
-
-
-
-
-
-
PE connection
®
modular
4
169