Setting The Time Format; Setting The Date Format; Display Brightness - TechniSat DIGITRADIO UP 1 Mode D'emploi

Masquer les pouces Voir aussi pour DIGITRADIO UP 1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

11.1.3 Setting the time format

In the Set Format submenu, you can activate the 12 or 24 hour clock format.
>
Keep the Info/Menu button depressed and use the << or >> buttons to select
the [Time] item.
>
Press the Enter button.
>
Using the << or >> buttons, select the [Set Format] item and press Enter.
>
Using the << or >> buttons, select one of the following options:
[24 hours]
[12 hours]
>
Press the Enter button to save.

11.1.4 Setting the date format

In the Set Date Format submenu you can determine the format for displaying the
date.
>
Keep the Info/Menu depressed and use the << or >> buttons to select the
[Time] item.
>
Press the Enter button.
>
Using the << or >> buttons, select the [Set Date Format] item and press
Enter.
>
Using the << or >> buttons, select one of the following options:
[DD-MM-YYYY] (day, month, year)
[MM-DD-YYYY] (month, day, year)
>
Press the Enter button to confirm.

11.2 Display brightness

It is possible to set the display brightness both for operation and standby.
>
Keep the Info/Menu depressed and use the << or >> buttons to select the
[Lighting] item.
>
Press the Enter button.
>
Select one of the following functions using the << or >> buttons, then press
the Enter button:
[Operation] regulates brightness in a normal, operating status. You can
choose from the [High], [Middle] and [Low] brightness intensities. Using the
<< or >> buttons, select a brightness intensity and press the Enter button to
save.
24

Publicité

Table des Matières
loading

Table des Matières