Signal Intensity; Manual Setting; Volume Adjustment (Drc); Deleting Inactive Stations - TechniSat DIGITRADIO UP 1 Mode D'emploi

7.2.6 Signal intensity

> Briefly press the Info/Menu button repeatedly until the signal intensity is
shown on the display by way of a bar chart.
Stations with a signal intensity below the required minimum signal intensity
are not transmitting a strong enough signal.

7.2.7 Manual setting

This menu item is used to check the reception channels and can be used to position
the antenna.
> Keep the Info/Menu button depressed, use the << or >> buttons to select the
[Manual Setting] item and press the Enter button.
> Use the << or >> and Enter buttons to select a channel (5A to 13F). The signal
intensity will now be shown on the display. If a DAB+ station is being received
on a channel, the station ensemble name is displayed.
Stations with a signal intensity below the required minimum signal intensity
are not transmitting a strong enough signal.

7.2.8 Volume adjustment (DRC)

With the Volume Adjustment menu item, the compression rate is set which balances
the dynamic variations and thereby the accompanying volume variations.
> Keep the Info/Menu button depressed and use the << or >> buttons to select
the item [Volume Adjustment].
> Press the Enter button.
> Select the compression rate using the << or >> buttons:
DRC high -
DRC low -
DRC off -
> Press the Enter button to confirm.

7.2.9 Deleting inactive stations

This menu item is for removing old stations and those no longer being received from
the station list.
> Keep the Info/Menu button pressed and use the << or >> buttons to select
the item [Delete Inactive Stations].
> Press the Enter button.
This is followed by the prompt [Delete OK?], to check whether the inactive stations
are to be deleted.
> Using << or >>, select the [Yes] item and confirm by pressing the Enter
button.
Current signal intensity
Minimum signal intensity
High compression
Low compression
Compression switched off.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
17