Description Of The Digitradio Up1; Scope Of Delivery; The Special Features Of The Digitradio Up1; General Device Functions - TechniSat DIGITRADIO UP 1 Mode D'emploi

4 Description of the DIGITRADIO UP1

4.1 Scope of delivery

Before start-up, please check whether everything has been delivered.
1 x DIGITRADIO UP1
1 x instruction manual
1 x Dual Installation Frame
1 x Antenna
Attachment materials

4.2 The special features of the DIGITRADIO UP1

The DIGITRADIO UP1 is comprised of a DAB+/FM receiver with the following
functions:
- You can store up to 10 DAB+ and 10 FM stations.
- The radio receives on the FM 87.5–108 MHz (analogue) frequencies and
DAB+ 174.9–239.2 MHz (digital).
- The device has a time and date display.
- Alarm function and sleep timer
- Music playback via Bluetooth

5 General device functions

5.1 Switching on the device

> Press the /Mode button to switch on the DIGITRADIO UP1.
After switching on for the first time the device automatically performs a
complete scan in DAB mode. While scanning, the display information shows
the progress, as well as the number of digital radio stations detected. After
completing the station scan the first DAB+ channel is played.

5.2 Switching off the device

> Keep the /Mode button depressed to switch the device to standby mode.
[Standby] appears briefly on the display. The date and time are shown on the
display. The display brightness in standby mode can be adjusted by following
the instructions in section 11.2.

5.3 Changing to DAB+/FM/Bluetooth mode

> Press the /Mode button briefly to switch between DAB+ (Digital Radio), FM
and Bluetooth.

5.4 Adjusting the volume

> Adjust the volume using the Vol +/- buttons. The set volume is shown on the
display by way of a bar chart.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
13