Time Format; Backlight; Equaliser Setting - TechniSat DIGITRADIO 20 CD Mode D'emploi

> Select the [Manual] option and confirm by pressing the SCROLL&SELECT
knob.
The current time is then shown and the hours flash. You can change the value with
the SCROLL&SELECT knob. Turning to the right increases the value and to the left
reduces it. The SCROLL&SELECT knob must be pressed after each entry to accept the
entry and start the next one. Enter the hours one after another then the minutes of
the current time. Then enter the year, month and, finally, the day of the current date.

12.1.1 Time format

To show the time, you can choose between the 24-hour format or the 12-hour
format.
> Press the MENU button and use the SCROLL&SELECT knob to select [Time
format]. Press the SCROLL&SELECT knob to confirm.
> Choose either [24 hours] or [12 hours] and confirm your choice by pressing
the SCROLL&SELECT knob.

12.2 Backlight

The display backlight or brightness can be selected separately for operation and for
standby mode.
> Press the MENU button and use the SCROLL&SELECT knob to select
[Backlight]. Press the SCROLL&SELECT knob to confirm.
> Select either [Operation] or [Standby], depending on which backlight you
wish to adjust, and move the SCROLL&SELECT knob.
> Adjust the brightness by rotating the SCROLL&SELECT knob in increments of 1
to 5 (1 = dark, 5 = bright). Press the SCROLL&SELECT knob to accept.

12.3 Equaliser setting

To adapt music playback to your personal listening habits, the DIGITRADIO 20 CD
offers the option of raising and lowering high tones (treble) and low tones (bass)
separately from each other. Moreover, you can activate the loudness function which
delivers a smooth bass and clear treble, especially when the volume is low.
> Press the MENU button and use the SCROLL&SELECT knob to select [Set EQ].
Press the SCROLL&SELECT knob to confirm.
> Select [Treble] and confirm the selection by pressing the SCROLL&SELECT
knob.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
29