Menu Setup - Abus HomeTec Pro CFT3000 Mode D'emploi

Signal
battery level or drive overloaded and key tones for the drive are not turned off)
Drive power
g. MENU FACTORY RESET
Change with
are deleted.
h.MENU SCHEDULES
Schedule A, schedule B, ... schedule O (total of 15 schedules).
Open the programming of the 1st schedule with
You can assign these to different users under MENU e. If you do not activate any individual days,
there will be no time limitation on the user's access!
Scroll through the days with
Time from format [hh:mm],
cancel
i.MENU HISTORY
Shows the events of the drive, e.g. user 1 unlocked.
Note: the last event is shown, with
mum of 32 events are shown, whereby the latest overwrites the oldest. The entry
„admin" is logged in the event log for unlocking without a code or automatically locking.
cancel
j. MENU SETUP
Greeting
Signal
Display light time
afterglow time.
cancel
26
Setting the acoustic in the drive
each end position: signal sounds when position open or locked is
reached
locked: signal only sounds when locked
not active: no signal sounds for any position (alarm tones such as low
cancel confirm
change the torque
automatic (restriction on, ca. 6 Nm)
maximum (ca. 8 Nm)
cancel confirm
from NO to YES. 3 seconds
cancel
.
-
0
confirm
confirm
Altering the greeting text. Assignment of the characters see
e. Continue to next character with
5.1
seconds
Configuring the acoustic feedback of the keypad.
The display light time can be selected with
confirm
confirms. Factory reset is performed. All settings
. Set the different access times.
sets the day as active (X) or inactive ( ).
, to format [hh:mm],
9
one can switch to the event before the last event. Maxi-
. Cancel with .
- .
0 9
. Save the name with 3
on, low, off.
from 2-10 seconds +