Abus HomeTec Pro CFT3000 Mode D'emploi page 25

Reduced
Automatic, 1x closing.
Drive power
all times to provide a longer service life for the batteries and key.
II. Structure with FCA3000 / FSA3550 window drive
Door 1, Door 2, Door 3. Note: if you are using multiple drives on different doors,
select the required drive.
Overview Driving cycles: shows how many times the system has been opened and
closed. Lock: shows the lock position (locked or unlocked, the window's
tilt position is not shown).
[1.00]: displays the installed software version.
Rename You can assign a name to each drive (e.g. front door, garage etc.). Assign-
ment of the characters see
Save the name with
Cancel with
Without code Lock without code. Note: If the menu option "lock without code" is
selected, you can lock the door simply by pressing
active.
Tilting funct. Selection of tilt function
If this setting is chosen, the window moves when pressing the transmit-
ter's „open" button from the tilt position to the "open" position. In doing
so, the window must always be brought in manually!
When using the tilting function, always pull the window by hand until
the drive has reached its rest position before actuating the drive! In
particular with older windows and patio doors, there is a risk that the
casement will be lifted out of its anchoring, when it is not brought in
manually.
Inactive: no signal sounds for any position
Start of drive: signal sounds at the start of the opening or locking drive
cancel confirm
Locking is reduced to one-speed (e.g. one-speed even for two-speed
locking and opening of the door). We recommend permanent two-speed
locking (Setting: „Automatic").
cancel confirm
Setting the drive speed. We recommend using the "Automatic" setting at
Automatic, Maximum.
cancel confirm
.
cancel
Inactive, active.
e. Continue to next character with
5.1
.
confirm
cancel c onfirm
.
. Inactive,
25