Abus HomeTec Pro CFT3000 Mode D'emploi page 24

f. MENU DRIVE
The menu drive is adapted automatically to match the drive used (HomeTec Pro CFA3000 door
drive or HomeTec Pro FCA3000 / FSA3550 window drive).
I. Structure with CFA3000 door drive
Door 1, Door 2, Door 3. Note: if you are using multiple drives on different doors,
select the required drive.
Overview
Rename
Without code
Automatic
Touch control
Latch time
Latch power
Signal
24
Driving cycles: shows how many times the latch was pulled, unlocked
or locked. Lock: shows the lock position (locked or unlocked).
You can assign a name to each drive (e.g. front door, garage etc.). Assign-
ment of the characters see
Save the name with
Cancel with
Lock without code. Note: If the menu option "lock without code" is
selected, you can lock the door simply by pressing
active. cancel
Automatic locking
Inactive, active.
If this function is enabled, you can set a time from - to,
in which the drive locks automatically. [hh:mm]
Note: In the set time it is regularly (approx. every 15 min.) queried whether
the drive is locked. This feature leads to higher energy consumption.
cancel confirm
Operating the drive keys
Active: all drive keys can be operated.
Operating keys: both arrow keys are deactivated on the drive
Inactive: all arrow keys are deactivated on the drive.
Latch inactive (from software version 4.0).
cancel confirm
time for which the latch is stopped when opening the door.
Can be selected with
cancel confirm
Medium, Low, High. (Recommendation: for optimal service life of
the cylinder and key, select the "Medium"/"Low" setting.)
cancel confirm
Setting the acoustic in the drive
Latch: signal only sounds when pulling back the latch
Locked: signal only sounds when locked
Each end position: signal sounds when position open or locked is reached
e. Continue to next character with
5.1
.
.
confirm
from 1 to 20 seconds.
. Inactive,
-
9
0
.