F Electrical And Electropneumatical Connections; Isotron, Isoplus, Isoplus Lite - eurodent ISOTRON Notice D'installation

ISOTRON - ISOPLUS - ISOPLUS LITE - ISOCONCEPT
F - ELECTRICAL AND ELECTROPNEUMATICAL CONNECTIONS

ISOTRON, ISOPLUS, ISOPLUS LITE

The box receives several cables, i.e. the grey cable which connects the foot-control cable to the box, the black four-wire cable
for serial connection with the dental unit, and the white three-wire cable (brown, blue, and yellow/green) for chair mains
supply.
The following ones are coming from the dental unit:
one three-wire (blue, brown, yellow-green) black cable, one three-wire (blue, brown, yellow-green) white cable, one more
white (two-wire) and one more black one (two-wire), a grey cable for dental unit connection to foot-control extension, a four-
wire black cable for serial connection to the chair, and one more black cable ending by two faston connections.
The safety connectors (a black and a white one) have ten terminals.
four-wire cable for serial
connection to chair
four-wire cable for serial
connection to dental unit
Plug both fast-on wires to the main solenoid valve for air and water (24 V).
Connect the foot-control extension cable (1) to the foot-control cable (2).
Connect the black four-wire cable (3) for chair serial connection to the black four-wire cable (4) from the dental unit.
The wires of the white cable (to switch the suction pump control circuit) must be connected to the first two brown contacts,
whereas the wires of the black cable must be connected to the other two brown contacts (to switch the circuit of nurse bell or
any other service).
42
white cable to dental unit
white cable to chair
3 1
foot-control
extension cable
4 2
220 VAC power mains
P. C
foot-control cable
to dental unit
white wires
black wires
black cable
Installation instructions
F1