Seat Pad - eurodent ISOTRON Notice D'installation

ISOTRON - ISOPLUS - ISOPLUS LITE - ISOCONCEPT
32

SEAT PAD

Connect the earth cable as shown in figure.
If not previously fitted, located the dowels in their seats (the long
one goes in the external rear hole), and fasten them by means
of the proper lock nut.
Fit the two front dowels as well.
B7
Then, as shown in the figure, position upholstery taking care of
inserting the dowels into the proper holes.
B8
Now, secure the pad by tighten the long cylindrical nuts of the
dowels.
To carry out this operation, use the long spanner supplied.
B9
In order to fix the front side, use M4 x 40 screws.
B10
Installation instructions