RIB KING Instructions Pour L'utilisation Et L'installation page 27

ADAPTER
Code CME5197
To apply to the KING's attachments produced up to March 2004.
PUSH-BUTTON FLAT
Code ACG2012 connection to motor
Code ACG2013 connection to control panel
SHIELDED WIRE
Code ACG2133
It is compulsory to use shielded cable for the encoder in order to guarantee the correct
operation of the control board.
The screen of the ENCODER cable must be earth grounded at one end (not to the
card GND), and at the opposite end the screen must be free (conductor not
connected).
MECHANICAL BOLT
Code ACG5000
For 2-leaf gates to latch closed gate to the ground.
Pag. 27 di 40
E
N
G
L
I
S
H