Brush Installation; Lifting And Transporting The Machine - Dustbane Hurricane Rally Manuel D'opération

Brush installation

Single-brush machine:
• Position the brush underneath the head, in the centre (Fig. 7); switch the machine on. Pressing the ATTACH/RELEASE
button once after starting the machine releases the brushes, pressing the button a second time activates automatic brush
attachment; the button is only enabled when all the functions are deactivated (suction motor and brushes).
Double-brush machine:
• Position the brushes underneath the head on both sides (Fig. 8), the brushes should rest on the brush centering device
in the centre of the head; switch the machine on. Pressing the ATTACH/RELEASE button once after starting the machine
releases the brushes, pressing the button a second time activates automatic brush attachment; the button is only enabled
when all the functions are deactivated (suction motor and brushes).

Lifting and transporting the machine

WARNING! All phases of lifting and moving must be performed in an adequately illuminated environment with
the adoption of the safety measures most appropriate to the situation. The operator must always use personal
protection devices.
Proceed as follows to load the machine onto a means of transport.
• Empty the tanks.
• Remove the batteries.
• Position the machine on a pallet and fix it in place with plastic straps or metal brackets.
• Lift the pallet (with the machine) using a fork lift truck and load it onto the means of transport.
• Anchor the machine to the means of transport with cables connected to the pallet and to the machine itself.
6