Send Message After; Voice On Line; Ring; Dial - DSC GS3050-A Mode D'emploi

Send Message after...

Select one of the following options:
Voice on line. The message will be played
as soon as the GS3050-A receives a voice an-
swer.
Ring. The message will be played as
soon as the GS3050-A detects the back ring.
Dial. The message will be played as soon
as the GS3050-A finishes dialling the telepho-
ne number.

Call successful number

If this option is enabled ( ), answered calls
will be called again during the subsequent call
cycles.
If this option is disabled ( ), answered calls
will be excluded from subsequent call cycles.
NOTE - If you wish to interrupt the ongoing
call and stop the call queue, press '*' on the
telephone pad.
SMS D P
IALLER AGE
This page (see Figure 10) will allow you to pro-
gram all the SMS Dialler parameters.

SMS

Using the SMS table, program the 8 message
texts. Each mesage can have up to 120 cha-
racters (including spaces). The chart in Figu-
re 10 shows the characters that can be used.
To program an SMS communication:
1. Click the relevant 'SMS' text field.
2. Enter the message.
Figure 10 - SMS Dialler Page and Valid Characters for SMS Communication Texts

Set Input

Using this table, program the parameters of
the Inputs:
Polarity (Normal status)
Select whether the input is to be activated by:
(á á ) - Positive signals, or
á á
á
(â â ) - Negative signals.
â â
â
Click the relative Input Polarity field to toggle
the status.
NOTE: The setting in this page will upda-
te automatically the corresponding set-
ting in the Dialler Page.

SMS ON

Triple-click the corresponding Input in the SMS ON
field, click to open the dropdown message list,
then select the message. The selected message
will be sent to the programmed Telephone num-
bers when the assigned Channel triggers an Event.

SMS OFF

Triple-click the corresponding Input in the SMS
OFF field, click to open the dropdown mes-
sage list, then select the message. The se-
lected message will be sent to the program-
med Telephone numbers when the associa-
ted Channel is restored to Standby.
NOTE - At default, No SMS Communica-
tions are assigned to the Channels.

Numbers to Call

Click ( ) the check boxes (1, 2, 3, 4, 5, 6, 7, 8)
of the Telephone numbers to call. The messa-
! " # % & '
Space
( ) * + , - .
/ 0 1 2 3 4 5
6 7 8 9 : ; <
= > ? A B C D
E F G H I J K
L M N O P Q R
S T U V W X Y
Z a b c d e f
g h i j k l m
n o p q r s t
u v w x y z
15