Reely SKY I-Helicopter Notice D'emploi page 32

Control functions of the operating interface:
1. Button for the Return function: Back to the model selection
2. Button for the helicopter illumination: Switching the LED illumination at the helicopter on or off
3. Buttons for the transmitter signal encoding: Switching the IR control signal encoding
This function is used to operate up to three models at once in the same room without the control signals of the
three IR adapters affecting each other. Each model must be operated with a different code.
4. Button for the reversing function: Rotation of the display by 180° (putting it on the head)
5. Button for the movement control: Switch turning and direction control of the model to the motion sensors in the
Apple® iPad, Apple® iPhone or Apple® iPod touch
6. Control area for the turning and direction control: Influencing the turning and direction control of the model (with
the motion sensors active, the control area is used as control display)
7. Button for IR adapter signal transmission: Switch the IR adapter on or off
With the IR adapter active, the display switches from "OFF" to "ON" and the blue operating control LED is lit at the
adapter.
8. Buttons for the trimming function: Balancing out independent turning motion of the model helicopter
9. Button for the rotor speed: Influencing the speed of the rotor blades and thus the flight height
32
Figure 5