Novoferm NovoSpeed Retail Manuel D'application page 11

4.19a
GB
When balancing with spring is used, the coil is pre-mounted onto the top roller.
Unwind the tension belt and align the coil using the reverse plate;
Leave 1.5 - 2 x of the belt on the coil!
4.19B
Feed the tension belt via the reverse plate into the spring chamber of the column.
18
1,5-2 x
4.20a
mounting plate
coil
reverse plate
When balancing with weights is used, slide and secure the mounting plate of the cover and the coil
over the shaft . Unwind the tension belt and align the coil using the reverse plate;
Leave 1.5 - 2 x of the belt on the coil!
4.20B
Feed the tension belt via the reverse plate downwards along the column.
GB
19