Miele MF03 10 Notice De Montage page 57

Produktgruppe 512
57 von 60
Note
Installation kit 04451340 for PW 610x, PW 613x , PW 616x and PW 620x also contains:
1 pipes 173 x 40
2 elbow 70 x 87 PP
1 branch pipe 70 x 50 x 87, DIN 19560
1 adapter
1 bushing DIN 4060, HTGM 40/50 C
1 branch pipe
1 ring
1 adapter
2 hose clips SGL 70-90
1 branch pipe 70 x 50 x 87, DIN 19560
1 pipes DIN 19560, 50 x 40
1 elbow 70 x 87 PP
8 hoses 1 1/4" 32 x 5,5
1 water recycling wiring harness
1 6-terminal terminal block
1 label 1-6,10 x 68
2 screws 3,5 x 11
Additional notes
Additional chart
1 setup for water recycling
1 WRG 02 hose assembly
These instructions
List of illustrations (PW 610x, PW 613x, PW 616x, PW 620x):
Fig. 1, Mixer box cover removal
Fig. 2, Removing the drain hose from the mixer box
Fig. 3, Water recycling connection stub on mixer box
Fig. 4, Drilling through water recycling connection stub on mixer box
Fig. 5, View of water recycling connection stub from liquid dispensing cover
Fig. 6, Water recycling intake
Fig. 7, Mixer box cover installation
List of illustrations (PW 6241, PW 6321):
Fig. 8, Hose pre-assembly
Fig. 9, Suds container preparation
Fig. 10, Laying the hoses
Fig. 11, Securing angled bracket and holder
Fig. 12, Securing the hoses
Fig. 13, Mixer box cover installation
List of illustrations (WS 5101, WS 5141, WS 5191, WS 5240, WS 5320):
Fig. 14, Hose pre-assembly
Fig. 15, Installing in the machine
Fig. 16, Intake hose for WS 5101, WS 5141
List of illustrations (WRG 02 water recycling assembly):
Fig. 17, Installing the holder frame
Fig. 18, Tank installation
Fig. 19, Installing the pre-assembled angled hoses
Fig. 20, Filter assembly
Fig. 21, Hose connections
16.12.2011 Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
M.-Nr. 04598534