Miele MF03 10 Notice De Montage page 15

Produktgruppe 512
15 von 60
Note
The kit, Mat. no. 04451340 for PW 610x, PW 613x, PW 616x and PW 620x, also contains the following:
1 pipe 173 x 40
2 bends 70 x 87 PP
1 branch piece 70 x 50 x 87, DIN 19560
1 connection stub
1 collar DIN 4060, HTGM 40/50 C
1 branch piece
1 ring
1 connection stub
2 hose clips SGL 70 - 90
1 branch piece 70 x 50 x 87, DIN 19560
1 pipe DIN 19560 50 x 40
1 bend 70 x 87 PP
8 hoses 1 1/4" 32 x 5.5
1 wiring harness - Water recycling
1 terminal strip, 6-pole
1 sticker 1 - 6,10 x 68
2 raised-head self-tapping screws 3.5 x 11
1 accessory - Information sheet
1 accessory - Installation
1 initial kit for water recycling
1 hose sub-assembly WRG 02
These fitting instructions - Connection for water recycling
List of illustrations (PW 610x, PW 613x, PW 616x, PW 620x):
Fig. 1: Mixer box cover plate removal
Fig. 2: Drain hose disconnection from mixer box
Fig. 3: Water recycling intake on mixer box
Fig. 4: Drilling out water recycling intake on mixer box
Fig. 5: Water recycling intake viewed from liquid dispensing cover plate
Fig. 6: Water recycling intake
Fig. 7: Mixer box cover plate fitting
List of illustrations (PW 6241, PW 6321):
Fig. 8: Connection hose pre-assembly
Fig. 9: Suds container preparation
Fig. 10: Connection hose fitting
Fig. 11: Angle connector fastening and holder
Fig. 12: Connection hose fastening
Fig. 13: Mixer box cover plate in fitted position
List of illustrations (WS 5101, WS 5141, WS 5191, WS 5240, WS 5320):
Fig. 14: Connection hose pre-assembly
Fig. 15: Fitting in the machine
Fig. 16: Intake hose - WS 5101, WS 5141
List of illustrations (WRG 02 water recycling system fitting):
Fig. 17: Mounting bracket
Fig. 18: Tank fitting
Fig. 19: Tank with angled hoses
Fig. 20: Filter unit assembly
Fig. 21: Hose connections
16.12.2011 Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
M.-Nr. 04598534