JVC KD-AR880 Manuel D'instructions page 44

Masquer les pouces Voir aussi pour KD-AR880:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Symptom
• Tracks do not play back in the order you have
intended them to play.
• Elapsed playing time is not correct.
• "Please Eject" appears on the display.
• "Not Support" appears on the display and
track skips.
• "No Files" appears on the display.
• Correct characters are not displayed (e.g.
album name).
• Noise is generated.
• Tracks cannot play back as you have intended
them to play.
• "File Check" keeps flashing on the display.
• "No Files" flashes on the display.
• "No USB" appears on the display.
• "Not Support" appears on the display and
track skips.
• "Read Failed" appears on the display.
• Correct characters are not displayed (e.g.
album name).
44
Remedy/Cause
Playback order is determined when files are recorded.
This occurs sometimes during play. This is caused by how
the tracks are recorded on the disc.
Insert a disc that contains MP3/WMA/AAC tracks.
Skip to the next track encoded in an appropriate format or
to the next non-copy-protected WMA track.
Change the disc that contains MP3/WMA/AAC tracks.
This unit can only display letters (capital: A – Z,
small: a – z), numbers, and a limited number of symbols
(see page 37).
• The track played back is not a playable file format
(MP3/WMA/AAC/WAV). Skip to another file.
• Do not add the extension code <.mp3>, <.wma>,
<.m4a>, or <.wav> to non-MP3/WMA/AAC/WAV
tracks.
Playback order may differs from the one played back using
other players.
• Readout time varies depending on the USB device.
• Do not use too many hierarchy, folders and empty
folders.*
• Turn off the power then on again.
• Do not pull out or connect the USB device repeatedly
while "File Check" is displayed on the display.
* Folder that is phisically empty or folder that contains data
but does not contain valid MP3/WMA/AAC/WAV track.
Connect a USB device that contains tracks encoded in an
appropriate format.
The track is unplayable.
The connected USB device may be malfunctioning, or may
not have been formatted correctly. The files included in
the USB device are corrupted.
For available characters, see page 37.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kd-g830

Table des Matières