JVC KD-AR880 Manuel D'instructions page 16

3
Enter the specific PIN code of the device to
the unit.
• Refer to the instructions supplied with the device
to check the PIN code.
4
Use the Bluetooth device to connect.
Now connection is established and you can use the
device through the unit.
Connecting a special device
Perform steps 1 – 3 on page 15, then...
1
Select "Special Device."
The unit displays the list of the preset devices.
2
Select a device you want to connect.
3
Use "Open' or "Search' to connect.
Connecting/disconnecting a registered device
1 "Bluetooth Phone" or "Bluetooth
Select
Audio."
2
Select a registered device you want to
connect/disconnect.
3
Enter setting menu.
16
4
Select "Connect" or "Disconnect" to connect/
disconnect the selected device.
You can set the unit to connect a Bluetooth device
automatically when the unit is turned on. (See
"Auto Connect" on page 36.)
Deleting a registered device
1 "Bluetooth Phone" or "Bluetooth
Select
Audio."
2
Select a registered device you want to delete.
3
Enter setting menu.
4
Select "Delete."
5
Delete the selection.
• Press number button 3 to select "No" or return to
4
step above.