Control Panel - Dri-Eaz LGR 2800i Guide D'utilisation

CONTROL PANEL

DISPLAY
ON/OFF
ON/OFF
DISPLAY MENU
MENU SELECTION /
UP KEY
PURGE PUMP
.
07-01674N F410, F411
PURGE PUMP
MENU
DISPLAY
SELECTION /
MENU
UP KEY
Press and release to turn unit
on
or off.
Press to select next item in
menu. Menu item will show in
display.
Press to toggle or select values
in menu displayed.
Press and release to start
purge. Display will count
down seconds remaining until
purge is complete.
To return to the main menu, press the ON/OFF key
once.
MENU SELECTION. Press to change the values of
the "User Defined" settings. The MENU SELECTION
key acts as the UP key for adjusting the setpoint for
Humidistat mode operation. See User Settings Menu.
PURGE. Press to empty water from the condensate
pump reservoir. The display will read PUMP PURGING
with a numeral countdown.
NOTE: During normal operation, the pump purges
automatically.
Changing settings and viewing system information
Display setting changes and system information can be
accessed by pressing
of the key will display the next parameter (see list
below). When you reach the parameter you wish to
adjust, press MENU SELECTION to increase the
value. Press DISPLAY MENU again to accept the
setting and re-start the display cycle.
Note that only menu items followed by a greater-than
symbol ( > ) may be adjusted.
4
DISPLAY MENU. Each press
Dri-Eaz Products, Inc.