Heating Up For The First Time - Sentiotec Concept R CP-R-090 Instructions D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 54
Instructions for use for the user

5.2. Heating up for the first time

CAUTION!
Smoke and odour formation when heating up for the first time
Work materials from the manufacturing process will be present on the new
heating elements. These evaporate when the sauna heater is heated up
for the first time. This produces smoke and an unpleasant odour. Breath-
ing in the fumes or smoke can be harmful to your health.
Perform the following steps when operating the sauna heater for the first time
and if the heating elements for the sauna heater have been changed. In this
way you will prevent damage to health due to the fumes and smoke produced
when heating up for the first time.
1. Select the highest possible temperature in the sauna control.
2. Heat up the sauna heater for half an hour.
Do NOT stay in the sauna cabin during this period.
3. Allow the sauna cabin to ventilate thoroughly after heating up for the first
time.
4. If no smoke or odour is produced the next time the sauna heater is heated
up, you can start to use the sauna.
If smoke or odour is produced again, leave the sauna cabin immediately
and repeat the initial heating up process followed by ventilation.
WORLD OF WELLNESS
p. 20/26

Publicité

Table des Matières
loading

Table des Matières