Sentiotec Concept R CP-R-090 Instructions D'installation Et D'utilisation page 34

Instructions for installation and use
● Make sure that no flammable objects are located on the sauna
heater before the control device is switched on.
● Heat up the sauna heater for half an hour BEFORE using the
sauna for the first time. Do NOT stay in the sauna cabin during
this period. After this, ventilate the sauna cabin thoroughly (see
5.2. Heating up for the first time).
● Never touch the sauna heater while it is in operation. The surfaces
of the sauna heater and sauna stones become extremely hot.
● For your own safety, consult your supplier in the event of problems
that are not explained to a large enough extent in the operating
instructions.
WORLD OF WELLNESS
p. 8/26