Sew Eurodrive MOVIGEAR SNI B Notice D'exploitation page 324

Caractéristiques techniques et feuilles de cotes
13
Exécution pour zones humides
This certificate for the HP200 surface treatment is based on
documented test procedures on material resistance
defined product specifications
a standardized cleaning procedure
Test procedure
Dipping test:
•
Test period:
•
The HP200 surface treatment was tested in the following media:
Alkaline and chlorinated foam cleaners
P3-topax 19
P3-topax 686
Acid foam cleaning agents
P3-topax 56
P3-topax 58
Product specifications:
P3-topax 19
Alkaline foam cleaning agent
P3-topax 56
Acid foam cleaning agent based on phosphoric
acid
P3-topax 58
Acid foam cleaning agent based on organic
acids
P3-topax 686
Alkaline foam cleaning agent with active chlorine
P3-topactive 200
Alkaline cleaning agent for operational cleaning as
TFC application
324
Notice d'exploitation – MOVIGEAR
Immersion into the test medium with contact surface
toward ambient air
7 days
5% 40°C
5% 40°C
5% 40°C
5% 40°C
®
SNI B
Evaluation:
• Evaluation approx. 7 days after regeneration
• Evaluation of changes of the protective properties
according to DIN EN ISO 4628-1
• Evaluation of decorative changes (color, brightness,
blistering)
(+) no changes
(o) possible minor changes
(-) possible changes under long-term influence
TFC cleaning agents
o P3-topactive 200
o P3-topactive 500
Disinfectants
P3-topax 990
o P3-topactive DES
+ P3-oxysan ZS
DI water
P3-topactive 500
Acid cleaning agent for operational cleaning as
TFC application
P3-topax 990
Alkaline foam disinfectant based on alkylamine
acetate
P3-topactive DES
Foam and TFC capable disinfectant based on
H O and peroxy acid
2 2
P3-oxysan ZS
Disinfectant based on peroxy compounds
DI water
Demineralized water
4% 40°C o
4% 40°C o
5% 23°C +
3% 23°C +
1% 23°C +
- 40°C +
18014401121992971